- Home
- Product Applications
- New Energy
- Lithium Battery and New Energy Vehicle Solutions
Lithium Battery and New Energy Vehicle Solutions
Electric Vehicles Prismatic Battery Cell Bonding
Bestry’s two-component structural adhesive is suitable for electric cehicles prismatic battery assembly, which can improve the shock resistance of the battery pack and the safety and stability of the battery module.
Battery Management System and Charging Pile Conformal Coating
Bestry produces coating materials based on different chemical systems, which are suitable for the three-proof protection (anti-moisture, anti-mildew, and anti-salt fog) of new energy vehicles and their charging system circuit boards.
Lithium Batteries Film Folding and Bonding
Bestry’s reactive hot-melt adhesive series is used for the folding and bonding of the aluminum-plastic film of soft-packed lithium batteries, optimizing the assembling size of the battery cell, and improve the efficiency of assembling space utilization.
Electric Vehicle Motor Potting
As an important process to ensure the reliable use of motors, Bestry provides a series of potting materials, which are suitable for the stator of electric vehicle drive motors potting.
Product name |
Technology system |
Application |
Features |
NTU606 |
Polyurethane |
Housing bonding |
Good adhesion to the PET insulating film of the battery cell. Rapid curing, and suitable for the high-speed assembling process |
NDU232 |
Multiple curing |
Conformal coating |
The multiple curing technology can ensure that the shadow part of the circuit board is fully cured |
NMS620 |
Multiple curing |
Conformal coating |
High reliability, excellent corrosion resistanceand electrical insulation |
NMU330 |
Polyurethane |
Lithium battery folding |
Good adhesion to different types of soft coated aluminum-plastic films |
NMU331 |
Polyurethane |
Lithium battery folding |
High initial viscosity, rapid curing, and suitable for high-efficiency production |
NTE101 |
Epoxy resin |
Stator potting |
Excellent thermal conductivity, low viscosity, and suitable for coating adhesives |
NTE102 |
Epoxy resin |
Stator potting |
After curing, the product is tough and strong. The adhesive is not easy to crack during the curing process |