Interior Bonding
Vehicle Roof Fabric Compound
The bonding of the PU and glass fiber non-woven fabric-reinforced board, fabric / PU foam material, real leather, suede imitation leather / PU foam material. The surface of the skeleton base layer is sprayed with the adhesive, on which the composite fabric is thermally pressed.
Frame Bonding
The pre-embedding / support bonding of the skylight frame generally adopts the hot-pressing compound, and the fabric flanging is generally brushed / sprayed, and then (heat) pressure compounded.
Console In The Instrument / Door Slab
The skeleton is generally made of ABS, PC, PP and PP with glass fibers, and the surface is generally made of PVC / PVC foam, PVC / PP foam, TPO / PP foam, PVC / fabric, PU / fabric, PU / PU foam and leather. It is compounded through female/male mold vacuum molding or manual hot pressing.
Vehicle Seat
It involves the bonding of PU foam, non-woven fabrics, ABS and PP plastic parts, PVC / TPO / PP (PE) foam, PVC / fabrics, steel plates, blankets and other materials. Generally, they are bonded by vacuum suction or manual brushing, hot pressed and compounded.
The water-based adhesives, hot-melt adhesives, polyurethane reactive hot-melt adhesives, and polyolefin reactive hot-melt adhesives developed and produced by Bestry meet the requirements on various bonding applications for automotive interiors.
Typical Product Application Examples
|
Product name
|
Product type
|
Recommended applications
|
Features
|
|
ATA-559
|
Water-based acrylic
|
Roof fabric compound
|
Good initial heat resistance and low VOC
|
|
ATU-523
|
Water-based polyurethane
|
Dashboards, door panels, and ceilings
|
General product and cost effective
|
|
ATU-524
|
Water-based polyurethane
|
Door panel superstructures, embedded, armrests and dashboards
|
Suitable for vacuum forming, hot pressing process, high heat resistance, low VOC and low odor
|
|
AHE-735
|
Ordinary hot-melt adhesive
|
Interiors, ceilings and plug-ins
|
Thermoplastic, high softening point, low VOC and low odor
|
|
AHE-736
|
Ordinary hot-melt adhesive
|
Interiors, ceilings and plug-ins
|
Thermoplastic, high softening point, low VOC and low odor
|
|
AMU-175
|
Reactive polyurethane
|
Tail covers, superstructures and instruments PCS
|
Rolling coating, spraying, short opening time, low VOC and low odor
|
|
AMU-176
|
Reactive polyurethane
|
Interior plug-ins, superstructures and dashboards
|
Rolling coating, high initial adhesion, short opening time, low VOC and low odor
|
|
AMU-179
|
Reactive polyurethane
|
Interior armrests, top installation and dashboards
|
Rolling coating, high initial adhesion, short opening time, low VOC and low odor
|
|
AHP-781
|
Reactive polyolefin
|
Superstructures and dashboards
|
Untreated PP, no primer TPO, low VOC and high initial viscosity
|
|
AHP-785
|
Reactive polyolefin
|
Superstructures, dashboards and door panels
|
Untreated PP, no primer TPO, low VOC, high bonding strength and high heat resistance
|
